Table of Contents
Advertisement
Display RDS information
RDS (Radio Data System) is a service that
allows FM stations to transfer additional
information. If you tune to an RDS station, an
RDS icon is displayed.
1
Tune to an RDS station.
2
Press RDS repeatedly to scroll through the
following information (if available):
» Program service
» Program type such as [NEWS] (news),
[SPORT] (sport), [POP M] (pop
music)...
» Radio text message
» Mono/Stereo
» Time
Adjust FM settings
1
In FM mode, press MENU to access the
menu.
2
Press OK to access sub-menus.
3
/
Press
•
: Search for strong stations
only.
•
: Search for all stations no matter
whether the signal strength of a station
is strong or weak.
4
Press OK to confirm the option.
14
EN
to select an option.
8 Listen to DAB
radio stations
Note
•
For optimal reception, fully extend the antenna and
adjust its position.
•
You can program a maximum of 20 DAB radio stations.
•
Check with local retailer or go to www.WorldDAB.org
for applicable DAB radio frequencies in your area.
Use for the first time
1
Press DAB or SOURCE to switch the
source to
.
2
/
Press
menu is displayed.
3
Press OK to activate the automatic search.
» This product automatically stores radio
stations with sufficient signal strength.
» After the search is complete, the
first stored radio station is broadcast
automatically.
4
/
Press
then press OK to start listening.
•
To re-scan for DAB stations, press and
hold SCAN/CLOCK for 2 seconds when
listening to a DAB station.
until the
to select a station, and
Advertisement
Table of Contents
