Page 1
U90-MXP Series User Guide - 04.10.qxd:User Guide 1/4/10 17:41 Page 1 Vax Careline: (UK) 0844 412 8455 (ROI) 1-800 928 308 Bagless upright MACH MACH Vax model number: U90-MXP series WARNING: This cleaner has a constantly rotating brushbar which, when left in...
Page 2
U90-MXP Series User Guide - 04.10.qxd:User Guide 1/4/10 17:41 Page 2 vax.co.uk 1. Diagram Mach XP Series Fig.1/1 1 Handle grip 12 Scuff guard bumper WARNING: This cleaner has a 2 Handle 13 Dusting brush/upholstery tool constantly rotating brushbar 3 TurboTool +...
U90-MXP Series User Guide - 04.10.qxd:User Guide 1/4/10 17:41 Page 3 Vax Careline: (UK) 0844 412 8455 (ROI) 1-800 928 308 2. Safety Information 14. Do not vacuum up hard or sharp objects such as glass, nails, screws, coins, etc.
Attach tools: (a) Clip the dusting brush into the holster at NOTE: Vax recommends that you raise the height of the side of the cleaner with bristles facing out. (b) Insert the brushbar when using this cleaner on lino and hard the crevice tool and extension wand into the slots on the flooring.
Page 5
U90-MXP Series User Guide - 04.10.qxd:User Guide 1/4/10 17:41 Page 5 Vax Careline: (UK) 0844 412 8455 (ROI) 1-800 928 308 Any of the accessories can be directly attached to the Floor/Carpet Cleaning hose end or the end of the extension wand (Fig.4/7).
U90-MXP Series User Guide - 04.10.qxd:User Guide 1/4/10 17:41 Page 6 vax.co.uk 5. Dirt container & filter: Clean foam filter removal & replacement WARNING: to reduce risk of injury from moving parts - unplug before servicing. Press dirt container removal button and lift dirt container from cleaner (Fig.5/1).
Page 7
U90-MXP Series User Guide - 04.10.qxd:User Guide 1/4/10 17:41 Page 7 Vax Careline: (UK) 0844 412 8455 (ROI) 1-800 928 308 Remove exhaust filter Press tab on front of exhaust cover and lift to remove. Fig.5/10 Fig.5/7 Press tab on exhaust filter and lift filter out of base of cleaner (Fig.5/8).
Page 8
U90-MXP Series User Guide - 04.10.qxd:User Guide 1/4/10 17:41 Page 8 vax.co.uk 6. Belt or brushbar: removal To replace belt or brushbar Slide belt onto motor shaft (Fig.6/4). and replacement TOOL REQUIRED: Phillips screwdriver WARNING: to reduce the risk of injury from moving parts - unplug cleaner before changing belt or brush.
U90-MXP Series User Guide - 04.10.qxd:User Guide 1/4/10 17:42 Page 9 Vax Careline: (UK) 0844 412 8455 (ROI) 1-800 928 308 Replace sole plate onto base of cleaner. (Fig. 6/7). 8. General maintenance WARNING: To reduce risk of injury from moving parts - unplug before servicing.
U90-MXP Series User Guide - 04.10.qxd:User Guide 1/4/10 17:42 Page 10 vax.co.uk Pivot lower housing and remove clog (Fig.8/4). 9. Troubleshooting WARNING: To reduce risk of personal injury, unplug vacuum cleaner before servicing. PROBLEM: Cleaner won’t run Cause: Not properly plugged into wall outlet.
U90-MXP Series User Guide - 04.10.qxd:User Guide 1/4/10 17:42 Page 11 Vax Careline: (UK) 0844 412 8455 (ROI) 1-800 928 308 10. UK Service & Help 11. Technical Specification Vax Careline: Voltage: 220 – 240V ~50Hz (UK) 0844 412 8455...
Page 12
17:42 Page 12 EEC STATEMENT OF COMPLIANCE Manufacturer/EEC importer: Vax Limited, hereby on our own responsibility, declare that the Mach XP Series is manufactured in compliance with the following Directives: Safety: 2006/95/EC Low Voltage Directive EMC: 2004/108/EC Electromagnetic Compatibility Directive Waste electrical products should not be disposed of with household waste.
Need help?
Do you have a question about the U90-MXP series and is the answer not in the manual?
Questions and answers