Table of Contents
Advertisement
Attaching the base (for selected models)
Note: Remove the monitor and monitor base from its packaging.
Carefully place the monitor face-down on a stable surface -- use a
cloth to avoid scratching the screen.
1
Attach the monitor stand arm to the base.
2
Ensure that the base is locked onto the monitor stand arm.
•
Secure the base to the monitor stand arm by turning the white screw using the
integrated tab or a suitable coin. (for selected models)
Note: Take care when performing the installation to avoid injuring
yourself.
2
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the SB220Q and is the answer not in the manual?
Questions and answers
It will not turn on. No led lights
The Acer SB220Q may not turn on and show no LED lights due to one or more of the following reasons:
1. The power cord may not be properly connected to the monitor.
2. The power switch might be off.
3. The monitor could be in a power-saving or standby mode.
4. A hardware failure might be preventing it from powering on.
A suggested solution is to unplug the monitor, hold the power button for about 20 seconds, then plug it back in and try turning it on again. If there is still no response, the issue may be hardware-related.
This answer is automatically generated