Video Connections - Crestron MP2 Operation Manual

Crestron MP2 & MP2E
Hardware Connections for the MP2 & MP2E
VIDEO IN:
FROM
COMPOSITE
OR S-VIDEO
OUTPUT(S)
Operations Guide – DOC. 6175A
VIDEO OUT:
TO
COMPOSITE
OR S-VIDEO
INPUTS
AUDIO IN:
FROM
BALANCED/
UNBALANCED
UNBALANCED
STEREO
LINE-LEVEL
OUTPUTS
AUDIO OUT:
IR IN:
TO BALANCED/
FROM
UNBALANCED
CNXRMIRD
STEREO
FOR RC-5
LINE-LEVEL
CODE
INPUTS
INFRARED-
SERIAL OUTPUT
(A - D):
TO IRP2 OR
SERIAL DEVICES
* The units can be powered through the NET network connector or by an AC power pack (PW-2410RU
included). If an alternate external power supply is to be used, Crestron recommends its CNPWS-75
External Power Supply or PW-2420RU Universal Power Pack or equivalent.
NOTE: Use care in wiring installations to avoid applying 24 VDC power to Cresnet
wiring from an AC power pack as well as from a system device that contains its own
power supply. Although this condition should not cause any damage, Crestron does
not recommend it. In those network configurations that require more power than can
be supplied by Crestron's Power Control Unit alone, disconnect the +24VDC
Cresnet wire from those devices that will be powered by an AC power pack.

Video Connections

VIDEO IN
Four 75Ω video inputs are provided for four composite or two S-video inputs. A
video sensor on each input reports to the CPU. S-video must use port 1 (luma) and 2
(chroma) for the first input, and port 3 (luma) and 4 (chroma) for the second input.
Example: Signal connections for S-video source 1 and 2
Video In 1: luma (Y1) The brightness and contrast of video signal source 1
Video In 2: chroma (C1) The color portion of video signal source 1
Video In 3: luma (Y2) The brightness and contrast of video signal source 2
Video In 4: chroma (C2) The color portion of video signal source 2
Series-2 Integrated AV Control System: MP2 & MP2E • 17
2-Series Integrated AV Control System
AUDIO IN:
FROM COM (A - B):
TO ANY RS-232,
STEREO -422 OR -485
LINE-LEVEL DEVICE
OUTPUTS
RELAY OUTPUT
(1 - 4):
TO
CONTROLLABLE
DEVICES
I/O (1 - 4):
TO CONTROLLABLE
DEVICES
FROM DEVICE OUTPUTS
- CONTACT CLOSURES
- RELAY CLOSURES
24VDC, 2.0A:
AC POWER
PACK (24 VDC,
2A)*
GROUND
LAN:
10/100 BASE-T
ETHERNET TO
LAN OR WEB
(MP2E ONLY)
COMPUTER:
TO SERIAL PORT
ON PC
CRESNET:
TO ANY
CRESNET
NETWORK
DEVICE*