Yamaha DTX-PROX Owner's Manual page 20

Setup Guide
Installing the DTX-PROX
4.
Hook the AC adaptor's cord around the cord
hook to secure it in place.
CAUTION
Excessive bending can damage the AC adaptor cord
and create a fire hazard. Ensure, therefore, that the
power cord is not bent at an extreme angle when
wrapped around the hook.
5.
Plug the AC adaptor's AC plug into a domes-
tic power outlet.
CAUTION
Even when the [
status (display is off), electricity is still flowing to the
instrument at the minimum level.
When you are not using the DTX-PROX for a long
period of time, make sure that you unplug the AC
adaptor from the wall AC outlet.
NOTE
When disconnecting the AC adaptor, turn the instrument and then carry out this procedure in reverse order.
 Connecting Headphones
Connect the headphones to the [PHONES] (headphone) jack.
CAUTION
Do not use headphones at high volume for an extended
period of time. Doing so can cause loss of hearing.
To adjust the headphone volume, use the [PHONES] slider.
To adjust the headphone EQ, set the Fader Select knob to
"CUSTM," and use the LED rotary faders.
One standard stereo phone jack and one stereo mini phone
jack are available. Select the proper jack that matches the con-
nector size of the cable. The output volume may be lower than
expected if both phone jacks are used at the same time.
16 DTX-PROX Owner's Manual
] (Standby/On) switch is in standby
AC adaptor cord
Power outlet
Front panel side
Cord hook
AC adaptor