Bosch DCN Next Generation Installation And User Instructions Manual page 74

DCN NG | Installation and User Instructions | Section 3 | Central Control Equipment
8.6.9 Set the unit name
The Unit Name item is used to assign a name to the
CCU. The default name for all CCUs is CCU. The unit
name may contain up to 16 ASCII characters.
8.6.10 Reset to factory default values
The Defaults menu item is used to reset all options to the
factory defaults. However, the unit name is not reset.
table 8. 1 2: Defaults submenu (* = default)
Menu item
3D Defaults ...
3D Defaults ...
Bosch Security Systems | 2004-03 | 9922 141 70521en
Options
Reset to defaults?
- No*
- Yes
Descriptions
Push the button to go to the submenu.
Cancel reset.
Reset all options to the factory default
values. The unit name is not reset.
en | 74