Factory Resetting; System Requirements; Safety Warnings - VOCOlinc L3 Manual

* If you set the brightness to 0% before turning off the light switch,
the smart light bulb will resume to 5% brightness as soon as you
turn on the light switch again to indicate that it is in good shape.

Factory Resetting

Resetting the smart light bulb can help you troubleshoot any issues
you may have. To reset it to factory defaults:
1. Turn the light switch controlling the bulb to the OFF position.
2. Flip the light switch on and off 3 times. Time lag between each cycle
must not exceed 5 seconds.
The Smart light bulb will blink three times once reset is completed.
Note: all connection data will be cleared. SmartGlow Light Bulb L3 must
be removed from the app and then added back again.

System Requirements

Mobile device running iOS12.0+ or Android OS4.3+
Existing Wi-Fi network
Stable Internet with good signal strength

Safety Warnings

WARNING: RISK OF ELECTRIC SHOCK OR BURNS. Switch OFF
the light switch controlling the bulb and WAIT for the bulb to cool
down before attempting to change it
DO NOT install the Smart Wi-Fi LED Bulb with wet hands or when
standing on wet or damp surfaces
Not suitable for use with standard in-wall dimmers. Dimmable via the
app only
Suitable for use in operating environment between 0°C and 40°C
(32°F and 104°F)
This device is not intended for use with emergency exit luminaires