Charging - SoFlow Flowbike Genuine Operating Instruction

Charger
 Water damage to the charger is not covered by the warranty. Store the charger in a dry location.

5.1 Charging

 Remove the protection lid from the charging socket.
 Connect the charger with the power cord.
 Connect the charger with a power outlet (AC100V-240V). The LED lamp of the charger will now turn green.
 Connect the charger with the charging socket of the Flowbike.
 The LED turns red which indicates that the battery is charging. When it turns green again, the charging process is
complete.
 The charger possesses an overcurrent protection. But when the voltage is too high this protection might fail. The
standard current lies around 3 A. A higher current might diminish the longevity of the battery.
If you have any troubles with the charging process, please contact the seller or an official dealer of this product.
Do not charge the FLOWBIKE without supervision and remove the charger when the charging process is completed.
copyright by www.flowbike.ch 28
Flowpad Bedienungsanleitung