Operation - Electrolux EMDN20S3MLW Instruction Manual

47 electrolux operation

Operation

Microwave cooking principles
1. Arrange food carefully. Place thickest areas towards outside of dish.
2. Watch cooking time. Cook for the shortest amount of time indicated and
add more as needed. Food severely overcooked can smoke or ignite.
3. Cover foods while cooking. Covers prevent spattering and help foods to
cook evenly.
4. Turn foods over once during microwave cooking to speed cooking of such
foods as chicken and hamburgers. Large items like roasts must be turned
over at least once.
5. Rearrange foods such as meatballs halfway through cooking both from top
to bottom and from the center of the dish to the outside.
Power Level
11 power levels are available.
Power Level
Level
10 9 8 7
Power
100% 90% 80% 70%
Display
PL10 PL9
PL8 PL7
6 5 4 3 2 1
60% 50% 40% 30% 20% 10%
PL6 PL5 PL3 PL2 PL1
PL4
Clock setting
1. Press "CLOCK/TIMER"once, "00:00"
will display.
2. Press the number keys and enter the
current time. For example, time is
12:10 now, please press "1,2,1,0" in
turn.
3. Press "CLOCK/TIMER " to finish clock
setting. ":" will flash and the clock will
be lighted.
4. If the numbers input are not within the
range of 1:00--12:59, the setting will
be invalid until valid numbers are
input.
Kitchen timer
1. Press "CLOCK/TIMER " twice, LED
will display 00:00, the first hour
figure flash.
0 2. Press the number keys and enter
the timer time.(the maximum
0%
cooking time is 99 minutes and 99
seconds)
Pl0
3. Press " START/+30S " to confirm
setting.
4. When the timer time arrives, the
buzzer will ring 5 times. If the clock
be set (12-hour system), LED will
display the current time.
The kitchen time is differ from 12-hour
system,Kitchen Timer is a timer.
During kitchen timer, anny program
cannot be set.
operation electrolux 48
In the process of clock setting, if the "
STOP/CANCEL " button is pressed or
if there is no operation within 1 minute,
the oven will go back to the former
setting automatically.
If the clock need to be reset, please
repeat step 1 to step 3.