Toshiba e-STUDIO 407CS Series Printing Manual page 157

4.PRINTING FROM UNIX/Linux
 Banner Page
A banner page is automatically generated for each file in each job. The banner page is always sent as a PCL5e job,
including the following items.
 Name of the user who performed printing
 Job ID number and workstation name from which the job was sent
 Job title (This can be specified using the "-t" option. The same title controlled by the "lp" command is normally applied
to each job.)
 Option specified when printing was performed
 Number of printed sheets
 Name of the printer and its IP address
 Date and time
Only one copy of the banner page is printed for each file, even if a number of copies of the job are requested. The banner
page is sent to the equipment as a separate sub-job so that it is never stapled to the document.
The banner page is printed with the following settings.
 Copies = 1.
 Stapling off.
 Orientation = portrait.
 Duplex off.
 Paper size as requested by the "-o" parameter or the printer's default value.
 The paper source and the media type for the banner page can be set to different values than the job's paper source
and media type.
 Auto paper source selection or the requested banner page source or media type.
 Output bin as requested by the "-o" parameter or the printer default value.
 6 lines per inch
 Auto-wrap on.
 Automatic carriage-return when a line-feed is sent.
 The banner page is designed to fit the paper bigger than Statement / A5.
The banner page uses the default paper size if paper is set to:
- Statement
- A5
- A6
- B5
- Postcard
 The default is that the banner page is printed before the job so that it is in the correct stacking order.
 When the language is set to "raw" the banner is always disabled.
 The paper source and the media type for the banner page can be set to values different than the job's paper source
and media type. If a banner paper source is not specified then the auto source command is sent. If a banner media
type is not specified, then no banner media type command is sent, so the printer's default value will be used.
 If the file being printed specifies the paper destination or the paper size internally, the banner page may printed to
the wrong output or on an incorrect paper size.
 Hole punching cannot be applied to banner pages.
4 PRINTING FROM UNIX/Linux
Printing From Application 155