G3 Digital Line - Aficio 200 Manual

8 Enter the function number for
"Own Analog Number" using the
Number keys.
9 Enter an own analog number us-
ing the Number keys and press
[OK].
a Press [PrevMenu] twice.
b Press the User Tool key.

G3 Digital Line

This function must be set when you connect the machine to a G3 digital line.
You can register the following items,
• CSI (up to 20 digits)
• Own Digital Number (up to 29 digit)
Hint
For how to register a CSI and your own digital number, see "G3 Analog Line"
(page 198).
If you change the subaddress, contact your service representative.
If you use subaddress function, you program the User Function key first.
1
1 Follow steps
136).
2 Enter the function number for "Key Op. Settings" using the Number keys
and press the Enter (#) key within 3 seconds.
3 Enter the function number for "G3
Digital Line" using the Number
keys.
3
to shown in "Changing the User Tool Settings" (page
199