Muzili G9070 User Manual page 17

You can't schedule
cleaning.
Suction power is weak.
Robot can't be charged.
Robot can't return to the
charging dock.
The rolling brush
doesn't rotate.
 Make sure the main power switch on the bottom of
robot is turned on.
 Make sure the time, time of day (AM/PM), and the
scheduled time have been set correctly.
 Check if robot's power is too low to start cleaning.
 Check if any obstructions are blocking the suction
inlet.
 Empty the dust bin.
 Clean the filters with a vacuum cleaner or a cleaning
brush.
 Check if the filters are wet due to water or other liquid
on the floor. Air-dry the filters completely before use.
 Check if the indicator on the charging dock lights up.
If not, contact the service center to repair or replace
the charging dock.
 Dust off the charging contact pins with a dry cloth.
 Check if you can hear a beep when robot is return the
charging dock. If not, contact the service center to
repair or replace the charging dock.
 Remove objects within 3 ft/1 m to the left and right
side and within 6 ft/2 m of the front of the charging
dock.
 When robot is in the vicinity of the charging dock, it
will return more quickly. However, if the charging
dock is located far away, the robot will need more
time to return. Please be patient as it works its way
back.
 Clean the charging contact pins.
 Clean the rolling brush.
 Check if the rolling brush and brush guard have been
installed properly.