Changing The Input Attenuation Setting - Sony WRT-860A Operating Instructions Manual

Changing the Input Attenuation Setting

You can change the input attenuation setting in 3-dB steps
in a range of 0 to 30 dB. You can change it either in setting
mode or in transmit mode.
Changing in setting mode
1
Press the SET/DISPLAY button once in channel number
selection mode or twice in frequency selection mode
before step 3 on the previous page.
Attenuator selection mode is initiated and the ATT
indication flashes.
AF RF
ATT
BATT
CH
2
Press the + or – button to select the attenuation setting.
ATT CH
If you keep either button pressed, the setting will be
incremented or decremented successively.
3
Once the desired level appears, set the POWER switch to
OFF to release setting mode.
The next time you turn on the power only by setting the
POWER switch to ON, the transmitter will be set to
transmit mode with the attenuation setting specified in
step 2.
ATT CH
15