Print A Part Of The Illustrations In Metallic Color - MIMAKI CJV150 Manual

Print a part of the illustrations in metallic color

This section describes this procedure from data creation to printing using the steps required to print the
character text of the illustration below in metallic color as an example.
By taking advantage of the swatch library of the metallic color, you can easily print the metallic color.
• Please create always a data in CMYK mode.
1.
Create metallic color plate and color plate.
(1) Select a character on the application.
(2) Specify any color from the MIMAKI SS21 Metallic Color Library.
Specify the word "OCEAN" to
"S-07C"
(3) Click [Setting] of RasterLinkTools.
(4) Setting screen is displayed.
1 Check [Print Special Color Layer]
2 Click [Setup] button.
(5) Click [Output to RasterLink] button of RasterLinkTools to save the hot folder of RasterLink.
1
- 15 -
Specify the word "DEW" to
"Cold_01"
2