Geemarc PhotoDECT 295 User Manual

USER GUIDE
1 2 3
!!! Please refer to our website: www.geemarc.com for an up
to date user guide, as there may be important updates and
changes you need to be aware of !!!
Congratulations on purchasing your Geemarc PhotoDECT295
handset, offering all the advantages of cordless technology
(compliant with Digitally Enhanced Cordless Telecommunications
- DECT standard). which can be used as additional handset
with our AMPLIDECT295 or AMPLIDECT COMBI 295 phones.
This telephone is also hearing aid compatible.
CAUTION: Use only the battery provided. There may be a risk
of explosion if a wrong type of battery is used for the parent
unit. The battery cannot be subjected to high or low extreme
temperature and low air pressure at high altitude during use,
storage or transportation. Disposal of battery into fire or a hot
oven, or mechanically crushing or cutting or the battery can
result in an explosion. Leaving the battery in an extremely
high temperature surrounding environment can result in an
explosion or the leakage of flammable liquid of gas. Battery
subjected to extremely low air pressure may result in an explosion
or the leakage of flammable liquid or gas. Dispose of used
battery according to the instructions.
Normal operating temperature for the product (e.g. 0
Use only the adapters and battery listed below.
Power adapter information: output: 6V DC 0.45A,
2.7W. Vtech Telecommunications Limited.
Model: VT05EEU06045 (EU), VT05EUK06045 (UK)
Rechargeable Battery Pack: Model: NI-MH AAA500
x 2. 2.4V, 500mAh. Corun.
Handset
Insert Photos for speed dial keys
Pod Connection Battery charging or
o o
C~40 C).
PACKAGE CONTENTS
1 cordless Handset, 1 power adapter, 1 Charger, 1 NiMh
battery pack, 1 user guide.
INSTALLATION
Connect the power adapter jack to charger then connect
the power adapter plug in mains power.
Use only the power adapter supplied with the phone!
Connecting the battery
Plug the battery connector
securely into the socket inside the
handset battery compartment.
Insert the supplied battery as indicated.
Align the cover flat against the battery compartment, and
then slide it upwards until it clicks into place
Handset Registration
.