When Using The Mdk-Arm - Epson S1C31 Setup Manual

3.1.2

When Using the MDK-ARM

Install the MDK-ARM by following the procedure shown below.
(1) Download the installer of MDK-ARM from the ARM web site.
(2) Finish all the application on the Windows.
(3) Double click the installer(exe file) to launch it. Then the installation wizard shown below will be displayed.
(Figure 3.1.2.1)
(4) Follow the prompts in the installation wizard to proceed with the installation of MDK Core. The
recommended settings are as follows.
• Installation directory: Default location
(5) Pack Installer is started automatically after the installation MDK Core, select [cortex-M0 plus] to install the
software pack for "cortex-M0 plus".
If you use MDK-ARM without code size limits after installation, license registration is required. The procedure
of license registration varies depending on the type of license you purchased. For more information on the
procedure of license registration, refer to "Getting Started with MDK"(listed in Table 2.2.1).
S1C31 Family Software Development
Setup Guide (Rev.4.0)
3. Setup of Software Development Environment
Figure 3.1.2.1 Installation Screen of MDK-ARM
Seiko Epson Corporation 5