Bc-8000 Care; Bc-8000 Calibration; Bc-8000 Specifications - Cofko LLC. BC-8000 Operation Manual

that is stored on the computers Local disk (C:) > Concorde > BC-8000. The CSV file can be imported into a
spread sheet program for viewing or generating custom reports if needed.

BC-8000 CARE

Your BC-8000 battery charger and capacity tester should be treated as precision test equipment. Misuse will shorten its
ability to perform accurate battery testing. Some simple guidelines of care will insure years of trouble-free operation.
1. Do not drop the BC-8000 or expose it to rough handling.
2. Do not expose the BC-8000 to water or fluids of any kind.
3. Do not operate the BC-8000 in a closed-up area.
4. Do not connect the BC-8000 to batteries of improper voltage ratings.
5. Do not operate the BC-8000 with the air intake or exhaust outlet blocked or restricted.
6. Do not carry the BC-8000 by the main power cable.
7. Do not operate the BC-8000 near flammable materials.
8. Do not expose the BC-8000 to direct sunlight during operation.
9. Do not expose the BC- 8000 to any other heat sources.
10. Always contact the technical support for questions on BC-8000 safety and operation. support@cofko.com
BC-8000 Field Calibration
With a CF-1 Field Calibration Fixture (P/N 4170) available from the distributor (Advanced Power Products) and the BC-
8000 calibration procedure, the BC-8000 can be calibrated in the field.
General Specifications

BC-8000 SPECIFICATIONS:

GENERAL SPECIFICATIONS
AC Input Voltage
AC Input Current
AC Input Frequency
Case Length
Case Width
Case Height
Weight
TIP: At the completion of a capacity test or discharge test, BC REPORT generates a CSV file
REMEMBER SAFETY FIRST!
100~264V AC 1 Phase
15A Max.
47-63 Hz
12 in (30.5cm)
9 in (22.9cm)
16 in (40.6cm)
19 lbs. (8.62kg)
17