Running A Dual Sensor System - LMI Gocator 1100 Series Manual

Running a Dual Sensor System

After the sensors are installed, laser ranging can be exercised to verify basic sensor operation.
To run a dual sensor setup for the first time:
1 Turn off the sensors and unplug the Ethernet
network connection of the Main sensor.
All sensors are shipped with a default IP address of
192.168.1.10. Ethernet networks require a unique
IP address for each device. Skip step 1 to 3 if the
Buddy sensor's IP address is already setup with an
unique address.
2 Power up the Buddy sensor.
The power LED (blue) of the buddy sensor should
turn on immediately.
3 Enter the sensor's IP address 192.168.1.10 in a
web browser.
This will log into the Buddy sensor.
4 Login as Administrator with no password.
5 Select the Connection Page.
Gocator 1100 & 1300 Series
GOCATOR POWER I/O CORDSET
ETHERNET CORDSET
POWER LED
http://192.168.1.10
Getting Started
MAIN
• 32