Table of Contents
Advertisement
Quick Links
MOUNTED ELECTRIC FIREPLACE
WARNING
WARNING!
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage
or loss, whether direct or indirect, or incidental, resulting from the incorrect attachment, improper use,
inadequate maintenance, or neglect of this product.
IF-FSB
Purchase Date:
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
customerservice@sunnydazedecor.com, or via our contact us page at
MODERN FLAME
Read and understand this entire manual, including all safety information,
before plugging in or using this product. Failure to do so could result in fire,
electric shock, or serious personal injury.
/
/
Order/Customer Reference Number:
2-PERSON
ASSEMBLY/
INSTALLATION
07/2020
https://tiny.cc/SunnydazeWarranty
https://tiny.cc/SunnydazeContact
Page 1 / 13
Advertisement
Table of Contents
Related Manuals for Sunnydaze Decor LEO-333
Summary of Contents for Sunnydaze Decor LEO-333
- Page 1 Order/Customer Reference Number: Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell. Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with the date of purchase as well as photos of the merchandise defect, must be provided.
-
Page 2: Important Safety Information
IMPORTANT SAFETY INFORMATION WARNING WARNING Read all instructions before using this heater! • This heater is hot when in use. To avoid burns, DO NOT touch hot surfaces. • Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9m) from all sides of the heater. - Page 3 WARNING • Do not install the fireplace against a vapor barrier or exposed insulation. • For residential use only! NOT for commercial use! Any commercial or public use of this heater voids all warranties and could cause injury. • This product is not intended to be a primary heat source. It is for supplemental heat only. •...
-
Page 4: Parts And Hardware
Parts and Hardware Parts Qty. Inspect packaging to ensure all parts are accounted for before disposing of packing materials. Fireplace M4 x 12mm Wood Screw M4 x 8mm Screw 2-PERSON ASSEMBLY/ Expansion Anchor INSTALLATION Remote Control Metal Bracket Drywall Anchor WARNING Decorative Crystals CHOKING HAZARD —... -
Page 5: Installation And Assembly
Installation and Assembly This electric fireplace is a wall-mounted, recessed and/or firebox installed appliance. Select a suitable location that is not susceptible to moisture and is away from drapes, furniture and high traffic areas. NOTE: Follow all National and local electrical codes. Minimum 39.4″... -
Page 6: Wall-Mounted Installation
Wall-Mounted Installation Due to the many different materials used on walls, it is highly recommended to consult a certified home contractor before installing this appliance on the wall. ENSURE the fireplace is unplugged before assembly, installation, cleaning or relocating. Failure to do so could result in electric shock, fire, or personal injury. Mounting Bracket Remove screws... - Page 7 Using the bracket as a template, mark the location where the anchor Figure 5 will be installed into the wall. G. Align Metal Bracket (F) with where it will install on the underside of the fireplace. Mark the location where the bracket will install into the wall and install the anchor.
-
Page 8: Recessed Installation
1. Select a location that is not prone to moisture and follows clearances as noted on page 5. Ensure the opening is large enough for the fireplace box. [Figure A] FIREBOX/FRAMING SIZE item number Width Height LEO-333 28.43" (72.2 cm) 17.44" (44.3 cm) LEO-340 32.40" (82.3 cm) 17.44" (44.3 cm) LEO-357 36.42"... - Page 9 Remove screws Remove screws Remove packing paper Figure C Figure D 3. Place the unit face-up on a soft, non abrasive surface. Remove the screws that are on both sides of the front glass panel. [Figure C] Save the screws for reinstalling the glass panel. Figure C Figure D 4.
-
Page 10: Master Switch
Operation WARNING Do not remove the glass panel while the fireplace is plugged in and operating as it will cause the remote control and touch panel to no longer function. Ensure the circuit breaker(s) for the power supply are turned on. Once the appliance has been plugged into a properly grounded electrical outlet, it is ready to operate. -
Page 11: Control Panel
CONTROL PANEL Button Function Action and Indication ON (─) Enables all functions. 1. Press ON (—). Power turns on. All functions are enabled. OFF (O) All functions on the control panel MASTER and remote control are disabled. 2. Press OFF (O). Power, flame effect, and all SWITCH functions turn off. -
Page 12: Temperature Limiting Control
WARNING: Do not move or remove the glass panel when the appliance is plugged in and operating as it will cause the remote control and touch panel to no longer function. Temperature Limiting Control This heater is equipped with a Temperature Limiting Control. Should the heater reach an unsafe temperature, the heater will automatically turn OFF. -
Page 13: Maintenance
Maintenance Risk of electric shock! DO NOT OPEN! No user-serviceable parts inside! ALWAYS turn the heater OFF and unplug the power cord from the outlet before cleaning, performing maintenance, or moving this fireplace. Failure to do so could result in electric shock, fire, or personal injury.
Need help?
Do you have a question about the LEO-333 and is the answer not in the manual?
Questions and answers
**** does not come on-
The Sunnydaze Decor LEO-333 may not turn on due to the following reasons:
1. Power Issue: Ensure the fireplace is plugged in properly and the power outlet is functioning.
2. Standby Mode: The unit might be in standby mode; pressing the power button should turn it on.
3. Safety Precaution: The fireplace must be correctly assembled and installed before use. Ensure it follows the manual’s instructions.
4. Flame Effect Requirement: The heater will not turn on unless the flame effect is activated.
5. Overheating Protection: If the heater was recently turned off, the fan may blow cool air for 30 seconds before shutting down.
6. Defective Unit: If none of the above resolves the issue, check for defects and contact customer service with proof of purchase and photos.
This answer is automatically generated