Proroute H685 User Manual page 55

SMS ACK: If checked, the router will send the command feedback to the sender's mobile
-
phone number.
Reboot Router Command: Input the command for "reboot" operation, default is "reboot".
-
Get Cell Status Command: Input the command for "router cell status" operation, default is
-
"cellstatus".
Set cell link-up Command: Input the command for "router cell link up" operation, default is
-
"cellup". If the router gets this command, the Router Cell will go online. Set cell link-down
Command: Input the command for "router cell link down" operation, default is "celldown". If
the router gets this command, the Router Cell will go offline.
- DIO_0 Set Command: Input the command for I/O port 0. For SMS feature, please keep the
default parameters.
- DIO_0 Reset Command: Input the command for I/O port 0. For SMS feature, please keep
the default parameters.
- DIO_1 Set Command: Input the command for I/O port 1. For SMS feature, please keep the
default parameters.
- DIO_1 Reset Command: Input the command for I/O port 1. For SMS feature, please keep
the default parameters.
- DIO Status Command: Input the command for I/O port status. For SMS feature, please
keep the default parameters.
- Wifi on Command: input the command for turning on WiFi. For SMS feature, please keep
the default parameters.
- Wifi off Command: input the command for turning off WiFi. For SMS feature, please keep
the default parameters.
E-mail: support@proroute.co.uk www.proroute.co.uk