Table of Contents
Advertisement
Luna G3 BPAP 25A (G3 B25A) User Manual
14. Heated Humidifier
The humidifier is integrated into your device. The humidifier may reduce nasal
dryness and irritation by adding moisture (and heat if applicable) to the airflow.
14.1 Filling the Water Chamber
14.1.1 Removing the Water Chamber
Press down the water chamber, and then remove it, as shown in Fig. 14-1
WARNING!
•
Turn the device off and allow approximately 15 minutes for the heater plate and
water to cool.
14.1.2 Filling Water
（ 1 ）Open the cap, as shown in Fig. 14-2, and fill the water chamber with
approximately 360 ml of water, as shown in Fig. 14-3. Make sure that the water does
not exceed the maximum water level line.
Fig. 14-1
Fig. 14-2
Fig. 14-3
22 / 48
MID-97/v1.0
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the G3 Series and is the answer not in the manual?
Questions and answers
My machine will not turn off in the morning after I remove the mask and push the in off button.
The 3B G3 Series machine may not turn off after removing the mask and pressing the off button because the Auto On/Off feature is enabled. This feature allows the device to start automatically when the user breathes into the mask. To turn off the device, ensure the Auto On/Off feature is disabled or wait for it to shut down automatically.
This answer is automatically generated