Table of Contents
Advertisement
20
SymNet1
User Manual
UDP unicast or TCP stream settings
Figure 13 illustrates streaming settings for a UDP unicast from the SymNet1 to the SymDec-4.
The SymDec-4 is set up as a receiver in Normal mode with the Receiver Cam Map IP address set at
192.168.10.20 (The IP address of the sender). The SymNet1 is set up as a sender with the streaming address set
at 192.168.10.40 The IP address of the receiver. Once these settings are saved on their respective web pages the
SymNet1 will begin sending streaming video (once requested) and the SymDec-4 will begin receiving
streaming video.
All the settings on the advanced streaming settings must match between the sender and the receiver.
In this configuration both the SymDec-1 and SymDec-4 are able to receive a video stream from the SymNet1
or SymVeo SV-XP1 IP Camera.
Figure 13. SymDec-4 set up as receiver and SymNet1 set up as sender
Advertisement
Table of Contents
