Electrolux EDH903BEWA User Manual page 10

10 www.electrolux.com
5.1 Installing and configuring
Electrolux Life
When connecting the tumble dryer to the
application, stand near it with Your smart
device.
Make sure that your smart device is
connected to the wireless network.
1. Go to the App Store on your smart
device.
2. Download and install App Electrolux
Life .
3. Make sure you started a Wi-fi
connection in the tumble dryer. If not,
read the next paragraph
the dryer wireless connection' .
4. Start the application. Select the
country and language and login with
Your email and password. If you do
not have an account, create a new
one following the instructions in
Electrolux Life
5. Follow the instructions on the App for
the appliance registration and
configuration.
5.2 Configuring the dryer
wireless connection
Have Electrolux Life downloaded and
installed on your smart device.
1. Press the on/off button for a few
seconds to activate the appliance.
2. Select a programme by turning the
programme dial.
3. Press and hold
button for 3 seconds.
The text
and the icon
wireless module begins starting up. It
may takes about 45 seconds before it is
ready. When the wireless module is
ready, the text
to inform you, that the access point will
be open for about 3 minute.
4. Configure the Electrolux Life app on
your smart device.
5. If the connectivity is configured,
(Access Point) symbol is off and the
icon
'Configuring
Remote touch
pop up for about 5 seconds
starts flashing and
(Access Point) is on
will stop blinking and lit
steadily to confirm that the
configuration was successful.
Every time you switch
the appliance on, the
appliance takes 45
seconds to connect to
the network
automatically. When the
indicator
blinking the connection
is ready.
To switch the wireless connection
off,Press and hold
button for 3 seconds until the first
acoustic signal:
display.
If you switch the appliance
off and on again, the
wireless connection is
automatically off.
To remove the wireless
credentials,Press and hold
touch button for 10 seconds until the
second acoustic signal:
appears on the display.
5.3 Remote Start
When the App is installed and the
wireless connection is complete, you can
start and stop a drying programme
remotely by activate remote start.
The Remote Control
activates automatically when
you press the Start/Pause
button to start the
programme, but it is also
possible to start a drying
programme
Activate Remote Start
1. Press the Remote button and the
indicator
display.
2. Press the Start/Pause button to
activate the Remote Start.
stops
Remote touch
appears on the
Remote
appears on the