Advertisement
Quick Links
Smoove Uno io
Smoove Uno io
Determine the rotation direction (the motor must be set)
1 Connect the motor using an setting cable
RTS
WT
230V AC
2 Check the rotation direction
RTS
WT
3 Change the rotation direction
ground wire
neutral wire
4 Put the application in the middle
RTS
or
WT
Put the application in the middle
OK 4
RTS
WT
Not OK 3
ground wire
neutral wire
Swap the black and the brown wires
1 1
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for SOMFY Smoove Uno io
Summary of Contents for SOMFY Smoove Uno io
- Page 1 Smoove Uno io Smoove Uno io Determine the rotation direction (the motor must be set) 1 Connect the motor using an setting cable 230V AC 2 Check the rotation direction OK 4 Not OK 3 3 Change the rotation direction...
- Page 2 Smoove Uno io Smoove Uno io Connect the motor on the control Motor 230V AC Overview of the control PROG Stop/my Auto/Manu Down...
- Page 3 Smoove Uno io Smoove Uno io Settings of the DIP switches Backside of the Smoove Uno io Setting of the application on the Smoove Uno io Rolling shutter Factory setting All OFF Screens No. 2 = ON Roller blind No. 3 = ON External venetian blind No.
- Page 4 2 Program or delete the transmitter This procedure can only be carried out within 30 s of the appliance being switched on or after inserted the electronic module into the Smoove Uno io Back of the Situo Back of the...
- Page 5 3 Product back in the orginal configuration (This procedure can only be carried out within 30 s of the appliance being switched on or after inserted the electronic module into the Smoove Uno io) All configurations and all saved io...
- Page 6 Smoove Uno io 5 Set the rotation angle for external venetian blinds >5 s Press the DOWN button until the Press simultaneous The blind performs down end limit is reached with the and at least 5 s on a short up and down...
Need help?
Do you have a question about the Smoove Uno io and is the answer not in the manual?
Questions and answers