Page 1
VERSION 1.4 Assembly Instructions NERA Bed with Nightstands...
Page 2
If you’re having difficulty, our friendly Customer Care team is always here to help. Call us at 1.888.746.3455 during business hours, email service@article.com or chat live at article.com. REQUIRED TOOL REQUIRED TOOL...
Page 3
Page 3 of 21 NERA Bed with Nightstands Structural integrity is warranted only if all fasteners are properly installed & tightened, and the bed is moved only per instructions. DO NOT SIT OR STAND ON NIGHTSTAND DO NOT DRAG BED, ALWAYS LIFT WITH...
Page 4
Page 4 of 21 NERA Bed with Nightstands BACK SIDE OF HEADBOARD × 8 × 6 Holes on double compression fitting anchors (2) must be facing inwards on headboard (A).
Page 5
Page 5 of 21 NERA Bed with Nightstands BACK SIDE OF HEADBOARD Note orientation of holes on side headboards (B/C). × 12 Secure first 6 screws (4) into headboard (A) first before attaching left and right side headboards (B/C).
Page 6
Page 6 of 21 NERA Bed with Nightstands FRONT SIDE OF HEADBOARD First remove plastic backing from teflon pads (5). Stick on bottom side of headboard (A) approx. 1/4” in from the edges. × 2...
Page 7
Page 7 of 21 NERA Bed with Nightstands Ensure center beam brackets (E) are level when installed. Use the 4 shortest bolts (7) provided. × 4...
Page 8
Page 8 of 21 NERA Bed with Nightstands × 6...
Page 9
Page 9 of 21 NERA Bed with Nightstands × 4...
Page 10
Page 10 of 21 NERA Bed with Nightstands × 4...
Page 11
Page 11 of 21 NERA Bed with Nightstands Note placement of holes on each corner piece, left vs. right. × 4...
Page 12
Page 12 of 21 NERA Bed with Nightstands × 8...
Page 13
Page 13 of 21 NERA Bed with Nightstands Labels on side rails indicate orientation. THIS SIDE UP × 4 Ensure side rails (F/G) are parallel with footboard (D) when tightening bolts (12).
Page 14
Page 14 of 21 NERA Bed with Nightstands × 10...
Page 15
Page 15 of 21 NERA Bed with Nightstands × 4 Unscrew bolts (11) from center leg Attach floating center legs (M) where labels are brackets (L) and floating center legs (M) situated on center beam (K). Ensure that legs before attaching to center beam (K).
Page 16
Page 16 of 21 NERA Bed with Nightstands B O A E A D B O A S ID TH IS E A D S ID TH IS × 2 IW-17-4008-51-X-0 Adjust levelers on floating center legs Insert pins on center beam brackets to allow for a 3-5mm clearance.
Page 17
Page 17 of 21 NERA Bed with Nightstands Insert metal pin on each nightstand bracket (N/O) through the corresponding hole on the headboard. × 4...
Page 18
Page 18 of 21 NERA Bed with Nightstands Mount nightstands (P/Q) on pins before securing with bolts (14). × 2 × 4...
Page 19
Page 19 of 21 NERA Bed with Nightstands DO NOT SIT OR STAND ON NIGHTSTAND MAY CAUSE INJURY AND/OR STRUCTURAL DAMAGE × 4...
Page 20
Page 20 of 21 NERA Bed with Nightstands × 28 × 28...
Page 21
Page 21 of 21 NERA Bed with Nightstands × 28 × 14 First, firmly insert pins on Second, firmly insert pins on slat slat clips into side rails. center brackets into center beam. DO NOT DRAG BED, ALWAYS LIFT WITH AT LEAST TWO PEOPLE BEFORE MOVING...
Page 22
SOFT CLOSING DRAWERS – LENIA / NERA ADJUSTMENT INSTRUCTIONS FIX A CROOKED DRAWER Adjust levers on either side of drawer as needed to straighten drawer. × 2 If you’re having difficulty, our friendly Customer Care team is always here to help. Call us at 1.888.746.3455 during business...
Need help?
Do you have a question about the NERA and is the answer not in the manual?
Questions and answers