Bridge Mode - Zte MC801A Getting Started

Bridge Mode

Your device supports the bridge mode and you can use this service from
your service provider to access the Internet.
1. E nsure that your device can connect to the Internet by using your
nano-SIM card automatically.
2. L og in to the 5G CPE configuration web page.
3. C hange the operation mode to Bridge Mode. The device will be
restarted automatically.
NOTE:
Please disconnect from the Internet first and then you can change the
mode.
4. T he first client connected to your device will obtain the IP address
from the WAN DHCP host and connect to the Internet directly.
NOTE:
The other clients cannot access the Internet. You can use those clients
to log in to the 5G CPE configuration web page.
8