Frame Memory Content Operations - Sony XVS-G1 User Manual

buttons for the even-numbered frame memory output
channel (FM2) are shown at the bottom.
For combined channels, information and operation
buttons for the combined frame memory output
channels (FM1/FM2) are shown.
To create still image content or video content:
Open the Home > Frame Memory > FM1/FM2 > Clip/
Still > Record menu (13101.13).
Information and operation buttons for the odd-
numbered frame memory output channel (FM1) are
shown at the top, and information and operation
buttons for the even-numbered frame memory output
channel (FM2) are shown at the bottom.
For combined channels, information and operation
buttons for the combined frame memory output
channels (FM1/FM2) are shown.
Combining frame memory output channels
Enable group mode.
This section describes combining FM1 and FM2 as an
example.
1
Open the Home > Frame Memory > FM Common >
Channel > Config menu (13109.32).
The combine status is displayed for each frame
memory output channel.
2
Set the [ ] button between [FM1] and [FM2] to the
on state.
Group mode becomes enabled, FM1 and FM2 output
channels are combined, and a blue frame appears. The
frame memory output channel display changes to
[FM1/FM2].
To uncombine, set the [
To enable group mode using the frame memory
output channel menu
Set the [Group Mode] button to the on state in the
following menus.
• Home > Frame Memory > FM1/FM2 > Clip/Still >
Recall menu (13101.11)
• Home > Frame Memory > FM1/FM2 > Clip/Still >
Record menu (13101.13)
Notes
• Channels cannot be combined/uncombined in the
following cases.
- When channels are locked
- When playing video
- When recording video or freezing a still image
• If group mode is enabled while content is recalled on a
frame memory output channel, the following occurs.
- If content 1 of combined content is recalled on FM1
and no content is recalled on FM2, the channels are
] button to the off state.
129
combined and content 2 corresponding to the
combined content on FM1 is recalled on FM2.
- If content 1 of combined content is recalled on FM1
and other content is recalled on FM2, a message
appears. If you press [OK], the content recalled on
FM2 is released, the channels are combined and
content 2 corresponding to the combined content on
FM1 is recalled on FM2.
- In all other cases, when content is recalled on FM1 or
FM2, a message appears. If you press [OK], the
recalled content is released, the channels are
combined, and both FM1 and FM2 become black
signals.
• If group mode is disabled while combined content is
recalled on FM1 and FM2, a message appears. If you
press [OK], the channels are uncombined, content 1 of
the combined content remains recalled on FM1, content
2 recalled on FM2 is released, and FM2 becomes a black
signal.
Locking a frame memory output channel
You can lock a frame memory output channel when still
image content or video content is recalled on the frame
memory output channel.
The following operations are inhibited on a locked frame
memory output channel.
• Recalling content
• Creating content (freeze, record)
• Enabling/disabling audio
The following operations are inhibited for content recalled
on a locked frame memory output channel.
• Trimming video content
• Unloading content
• Deleting content
To lock FM1, set the [Output Lock] switch for [FM1] to
the on state in the following menus.
• Home > Frame Memory > FM1/FM2 > Clip/Still >
Recall menu (13101.11)
• Home > Frame Memory > FM1/FM2 > Clip/Still > Play
menu (13101.12)
• Home > Frame Memory > FM1/FM2 > Clip/Still >
Record menu (13101.13)

Frame Memory Content Operations

For details about displaying and selecting content, see
"Content Operations" (page 271).
Loading content
You can load content into frame memory from content
storage.