Operation; Install The Spg-Digi; Switch On The Spg-Digi - STAUFF SPG-DIGI Operation Manual

4. Operation

4.1

Install the SPG-DIGI

NOTIFICATION
Material damage due to excessive force.
► Only ever hand-tighten the SPG-DIGI (together with the
pre-installed adapter)!
► If you operate the SPG-DIGI without an adapter, main-
tain the permitted tightening torque of 35 Nm.
1
Mount the SPG-DIGI in the desired position using the pre-in-
stalled adapter.
4.2

Switch on the SPG-DIGI

The SPG-DIGI is supplied from the factory with built-in batteries.
1
Press the ON/OFF key.
Ä The SPG-DIGI starts and carries out a self-test.
Ä The current settings are displayed one after the other.
V1.0/01/20
Operation
15