Care And Maintenance - Invacare Matrx PB Elite User Manual

If the cord length was modified, carefully melt the ends of the cord to prevent fraying.

A
Thread cord through the latch mechanism.
Tie a knot using both
B
Melt cord ends to prevent fraying.
4.4 Lumbar Support (Optional)
 The Lumbar Support is a pre-
fabricated foam insert that provides
lower back support for additional
comfort. The position of the lumbar
insert can be adjusted inside the
Invacare Matrx Elite cover, or it may
be removed if no lumbar support is
desired
Lumbar Support Adjustment
1. To access the Lumbar Support, open the hook
and loop fastening strips on the outer cover at
the bottom rear of the back pan.
2. The foam lumbar support/ insert is installed
inside the Invacare Matrx Elite cover between
the foam back cushion and the back pan (see
image B)
3. The lumbar support can be adjusted manually to
any desired height/position.
4. Refasten the cover onto the back pan.

5 Care and Maintenance

5.1 Cleaning
The cover may be easily wiped down with a damp cloth when necessary. The cover can be removed for
laundering or providing access to the inside of the back for modification. Carefully remove the cover by
releasing the hook and loop fasteners along the top and bottom edge and inside of the back shell. Remove
the inner foam cushion from the cover prior to laundering.
Invacare® Matrx® PB Elite
Press button to
cord ends.
open/adjust.
Cord
Lock
A
Hook and loop fastening strip
B
Foam Cushion
10
Installed Back
45°
Lift cord to
release back
cushion.
Lumbar
Support
Foam Cushion
Lumbar Support
Part No 1171724
Front