Bulb replacement
Switch off the ignition and turn off the
relevant switch or close the doors.
Only hold a new bulb at the base. Do
not touch the bulb glass with bare
hands.
Use only the same bulb type for
replacement.
Bulb check
After a bulb replacement, switch on
the ignition, operate and check the
lights.
Headlights
Low beam and high beam
Replace headlight bulbs from within
the engine compartment.
1. Remove protective cover by
rotating it anticlockwise.
2. Detach wiring connector.
3. Release retaining clip (see
illustration) and remove bulb.
4. Renew bulb and install retaining
clip ensuring that bulb is in correct
orientation.
5. Reattach wiring connector and
protective cover.
Vehicle care
Sidelights / Daytime running lights
1. Remove protective cover by
rotating it anticlockwise.
2. Release retaining clips and
remove bulb holder from reflector
housing.
3. Renew bulb.
4. Install bulb holder in reflector
housing and engage retaining
clips.
5. Install protective cover.
175
Need help?
Do you have a question about the VIVARO and is the answer not in the manual?
Questions and answers
Where I location central locking reciever
The central locking system in a Vauxhall Vivaro is controlled by the UCH (Body System Control Unit), which is located on the right-hand side of the steering column. It has two plugs: one white and one black.
This answer is automatically generated