Cisco Catalyst 2940 Series Datasheet

Data Sheet
Cisco Catalyst 2940 Series Switches
® ®
The Cisco Catalyst 2940 Series switches are small, standalone, managed switches with eight Fast Ethernet ports
and a single integrated Fast Ethernet or Gigabit Ethernet uplink. The switches are designed to be used outside the
wiring closet in the end-user workspace, and feature a durable metal shell, no fan for silent operation, easy wall or
under-the-desk mounting, a security lock slot to prevent theft, and an available cable guard to secure the Ethernet
cables and switch.
Figure 1. Cisco Catalyst 2940 Series Switches
The Cisco Catalyst 2940 Series is extremely easy to set up and configure via Cisco Express Setup, a simple Web-Based setup utility.
For more advanced configuration and ongoing management, the Cisco Catalyst 2940 Series has a console port and supports remote
management protocols such as Telnet, Simple Network Management Protocol (SNMP), as well as Cisco Network Assistant, which is a
free PC-based network management application. Combine this with the rich functionality of Cisco IOS
provide comprehensive functionality and manageability for classrooms, conference rooms, or other very small workgroup environments.
In addition, the Cisco Catalyst 2940 Series is supported by a limited lifetime warranty. The Cisco Catalyst 2940 Series switches provide
the lowest total cost of ownership in their product class with their durable design, enhanced security, simple installation and management,
and award-winning Cisco support.
CONFIGURATIONS
Cisco Catalyst 2940-8TT:
●
Eight 10/100 ports
◦
One 10/100/1000BASE-T port
◦
Cisco Catalyst 2940-8TF:
●
Eight 10/100 ports
◦
One 100BASE-FX port and One 1000BASE-X Small Form-factor Pluggable (SFP) slot (only one active port at a time)
◦
All contents are Copyright © 1992–2006 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
®
Software, and these switches
Page 1 of 12