Prerequisites; Required Information; Required Equipment; Required Tools - Pedigree Technologies OneView TTU2830 Installation Manual

Prerequisites

Required Information

• Name of asset (ex: Loader #20)
• Detailed information about the asset (year, make, model, VIN, license plate, etc.)
• State, area, organization, or group the asset belongs to (ex: North Region, MN tankers, etc.)
• ESN of each device to be installed (ESN is found on the back of each unit with a barcode)
• Current hour meter reading on equipment

Required Equipment

TTU 2840

Required Tools

• Drill and assorted drill bits
• Slotted and Philips Torx bits (in some cases you may need tamper resistant Torx bits)
• Small socket set
TURN TO THE LAST PAGE - WRITE DOWN THE REQUIRED INFORMATION!!!
• Decide where the hardware components will be located and make sure the device is secured
within the cabling distance to the power source.
• The device must have a clear view to the sky, free from metal obstructions.
• Ensure that the mounting location has enough integrity to accommodate the additional weight
and vibration of the device.
• Ensure that the trailer/equipment is connected to a power source to complete and test the install.
• Additional mounting harware may be needed.
PedigreeTechnologies.com | Support: (701)-499-0022
Power Cable
Before You Begin
2
Mobile Equipment Manager
Fuse Holders (2)
Fuse Taps (4)
2 Regular, 2 Mini
(TTU2830/TTU2840)
TTU 2830