Preparations For Jacking; Jack Location - Jeep GRAND CHEROKEE L 2021 Owner's Manual

282 IN CASE OF EMERGENCY
P F J
REPARATIONS OR ACKING
1. Park the vehicle on a firm, level surface as far
from the edge of the roadway as possible.
Avoid icy or slippery areas.
WARNING!
Do not attempt to change a tire on the side of
the vehicle close to moving traffic. Pull far
enough off the road to avoid being hit when
operating the jack or changing the wheel.
2. Turn on the Hazard Warning Flashers.
3. Apply the parking brake.
4. Place the gear selector into PARK (P).
5. Turn OFF the ignition.
6. Block both the front and rear of the wheel
diagonally opposite the jacking position. For
example, if changing the driver's front tire,
block the passenger's rear wheel.
Wheel Blocked
NOTE:
Passengers should not remain in the vehicle when
the vehicle is being raised or lifted.
J L
ACK OCATION
The scissor-type jack and tire changing tools are
located in the rear cargo area, under the load floor.
NOTE:
Jack Locations vary depending on vehicle trim
level.
1. Locate and lift up on the load floor handle.
Load Floor Handle
2. Access the jack and tool storage.
Jack Storage Location (Without Air Suspension)