Steps
1. Press and slide the speaker in the slot on the chassis until it snaps into place.
2. Route the speaker cable through the routing guide on the chassis.
3. Connect the speaker cable to the connector on the system board.
Next steps
1. Install the
side
cover.
2. Follow the procedure in
Power button
Removing the power button
Prerequisites
1. Follow the procedure in
2. Remove the
side
cover.
3. Remove the
fan
duct.
4. Remove the
front
bezel.
About this task
The following images indicate the location of the power button and provide a visual representation of the removal procedure.
46
Removing and installing components
after working inside your
before working inside your
computer.
computer.