Table of Contents
Advertisement
LABELS AND SYMBOLS
The nameplate label is adhered to the
bottom of your iluminageTOUCH system.
It displays the manufacturer's name and
address, the system's part & LOT numbers,
electrical and regulatory standards with
which the iluminageTOUCH system is
designed to comply.
Degree of protection against ingress
water: IPX1
This device is not suitable for use in
the presence of flammable anesthetic
mixture with air or with Oxygen or Nitrous
Oxide.
DEFINITION OF SYMBOLS/ DEFINICIÓN DE LOS SÍMBOLOS
WEEE - Waste Electrical and
Electronic Equipment
Directiva de Residuos de Aparatos
Eléctricos y Electrónicos
Follow Operating Instructions
Siga las instrucciones de operación
Class II equipment
Equipo Clase II
Do Not Use in wet environment
No usar en entornos mojados
MANUFACTURER INFORMATION/ INFORMACIÓN DEL FABRICANTE
42
ETIQUETAS Y SÍMBOLOS
La etiqueta de placa de identificación está
adherida a la parte inferior de su sistema
iluminageTOUCH. Muestra el nombre y
dirección del fabricante, los números de parte
y lote del sistema, los estándares eléctricos y
regulatorios que sistema iluminageTOUCH
está diseñado para cumplir.
Nivel de protección contra ingreso de
agua: IPX1
El dispositivo no es adecuado para su
uso en presencia de mezclas anestésicas
inflamables con aire, oxígeno u óxido
nitroso.
Degree of protection against electric
type BF applied part
Grado de protección contra descarga
eléctrica: aparato tipo BF
CE Mark
Marca CE
ETL Mark for USA and Canada
Marca ETL para EE.UU. y Canadá
Advertisement
Table of Contents
Need help?
Do you have a question about the iluminage TOUCH and is the answer not in the manual?
Questions and answers
Can the Iluminage touch be used on the hair follicles on your nose and ears?
No, the ILUMINAGE TOUCH should not be used on the ears. The manual explicitly states that it should not be applied to ears. However, there is no specific mention of the nose, but given the warnings about sensitive areas, it is advisable to avoid using it on the nose as well.
This answer is automatically generated
Unable to get a new Iluminage Touch to turn on. Light keeps flashing and have tried all possible solutions.
A flashing light on the ILUMINAGE TOUCH may indicate different issues:
1. No lights are on:
- Possible cause: Power cable is not connected.
- Solution: Connect the power cable.
2. All elōs energy setting buttons on the base (HIGH-MEDIUM-LOW) are blinking:
- Possible cause: No elōs energy level was selected.
- Solution: Select an elōs level.
3. elōs activation button on the applicator is blinking:
- Possible cause: An elōs energy level was selected, but the activation button was not pressed.
- Solution: Press the elōs activation button.
4. Indicator light for the elōs cartridge is on continuously:
- Possible cause: No remaining pulses in the elōs cartridge.
- Solution: Replace the elōs cartridge.
Following these steps should resolve the flashing light issue.
This answer is automatically generated