Button And Port Functions - dji OM 5 User Manual

Using DJI OM 5
After powering on, DJI OM 5 will enter follow mode by default. The gimbal converts joystick
movements into smooth pan and tilt transitions, and reduces the impact of natural vibrations.
The mobile phone can by adjusted by hand as well.

Button and Port Functions

M Button
When Powered off
Press once: check battery level.
Press and hold: power on.
When Powered on
Press once: switch between photo or video mode (by default) or enter quick
settings (function set in DJI Mimo).
Press twice: enter standby mode (press any button to exit).
Press four times: switch between FPV and follow mode.
Press and hold: power off.
Shutter/Record Button
Press once: take a photo or start or stop recording.
Press and hold: for burst shooting when in photo mode.
Switch Button
Press once: switch between front and back cameras.
Press twice: switch between landscape and portrait mode.
Joystick
Move vertically to tilt the mobile phone. Move horizontally to pan the mobile
phone. The joystick control direction can be set in DJI Mimo. The feature of
joystick also can be set to switch quick settings.
Zoom Slider
Move the slider to the + position to enlarge the subject and move the slider to
the - position to shrink. Push the slider once to change the zoom once. Push
the slider continuously to change the zoom continuously.
8
© 2021 DJI OSMO All Rights Reserved.