Summary of Contents for Hollis S.M.S.100 Harness
- Page 1 S.M.S.100 Harness – User Guide Hollis Gear 2002 Davis Street, San Leandro, CA 94577 Phone: 888.383.DIVE Fax: 510.729.5115 www.HollisGear.com / Info@hollisgear.com...
- Page 2 2002 Davis Street San Leandro, Ca. USA 94577 Trademark Notice Hollis and the Hollis logo are registered trademarks of Hollis. All rights are reserved Patent Notice U.S. Patents have been issued, or applied for, to protect the following design features: backpack systems (U.S.
- Page 3 Sidemount Training for this specific product. Hollis gear must NOT be used by untrained persons who may not have knowledge of the potential risks and hazards of scuba diving. As with all underwater life support equipment, improper use or misuse of this product can cause serious injury or death.
- Page 4 Do not inflate both bladders at the same time, this could decrease the overall lift provided by the bladder. • If you do not fully understand how to use your Hollis BC, or if you have any questions regarding its functions, you should seek instruction in its use from your authorized Hollis dealer before you utilize this product.
- Page 5 Overview The SMS100 Sidemount system was designed not just with the sidemount cave divers in mind, but any diver. Whether you are a beginner, advanced or technical diver, this kit was designed for you. Kit comes pre-assembled making configuration much easier. The SMS100 is suitable for side mounting twin or single cylinders, but also for use with rebreathers or rear mounted singles.
- Page 6 Shoulder Webbing woven through wing slots - Long to support shoulder weights 1” D-rings on for bungee attachment – Top D-rings are preferred placement Embroidered Hollis logo SMS100 Wing - 52 lbs. lift - 360 Degree wing Alternate mounting points for rail system Rear mounted 2”...
- Page 7 How To “Rig” Your Bottles Right Bottle Elastic Tank bungee 7 ft. low pressure hose connected to primary 2 stage w/bolt snap 36 in. low pressure hose connected to alternate 2 stage w/Reg necklace Left Bottle Brass SPG w/ 6” HP hose 212 adjustable 2 stage (unit shown –...
- Page 8 Attaching Cylinders to the SMS100 Provided with each SMS100 complete harness is the hardware to support two sidemounted tanks. This includes the following (image below): • SS Cam Bands – Qty 2 • SS Tri-Glides – Qty 2 • SS Bolt Snaps 4.5” – Qty 4 •...
-
Page 9: Final Configuration
Final Configuration Your SMS100 Harness comes pre-assembled which makes final configuration much easier. The last step is the adjustment of the harness. To ensure proper fit when donning the harness, first tighten the waist strap. This will help the following steps pull the harness tight against the body. - Page 10 SMS100 Reference/Part Information Complete Kits 208.1300.003 SMS100 - SM/MD - Single Pkg 208.1300.005 SMS100 - LG/XL - Single Pkg 208.1300.007 SMS100 - XXL - Single Pkg 208.1302.003 SMS100D - SM/MD - Dual Pkg 208.1302.005 SMS100D - LG/XL - Dual Pkg 208.1302.007 SMS100D - XXL - Dual Pkg Component Parts...
-
Page 11: Care And Maintenance
Care and Maintenance Your Hollis BC is a reliable piece of equipment that was designed to withstand the rigors of diving and will last for many years if cared for properly. Follow the procedures below to ensure a long life for your BC. You should have the entire BC inspected and serviced annually by an authorized Hollis dealer to ensure it is operating properly and that no components are showing signs of wear.
Need help?
Do you have a question about the S.M.S.100 Harness and is the answer not in the manual?
Questions and answers