Battery Pack Removal - JETSURF ELECTRIC User Manual

JE_0605
A
Caution (Risk of Injury)
Never insert the engine shut-off key in the engine shut-off switch if all the locks on the
battery pack are not secured.

6.4. BATTERY PACK REMOVAL

Note (Material damage)
Before removing the Battery Pack after the ride, do not forget to let all the remaining
water out of the cooling system (
system can result in permanent damage to the battery, connector and regulator.
• Place the battery pack in the Jetsurf Electric
so that the battery plug
socket
figure JE_0605).
B
C
• Press the battery pack downwards.
JE_0606
• Secure the battery pack using all 4 (four)
locks
JE_0607
p. 52). The presence of the water in the cooling
6. BATTERY PACK
are against each other (see the
C
.
A
and battery
B
27