Individual Tuning With Perfectune - DTE PedalBox Manual

dystrybutor

Individual tuning with PerfecTune

How you perfectly match your PedalBox to your vehicle
Turn on the ignition. The engine does not need to run. If so, make sure your vehicle is
idling.
Press and hold the plus and minus buttons for at least 3 seconds. The status display
shows all red and green bars. PerfecTune is now ready to be customized to your
accelerator pedal, the program button is blinking in white.
Slowly press the accelerator pedal from the neutral position to the full throttle position.
For automatic gearshifts you may need to overcome a slight resistance (kick-down).
Release the accelerator pedal back into the neutral position. You can measure the
pedal path several times by pressing the accelerator, the status display shows you the
accelerator pedal position.
To complete PerfecTune, press the blinking program button for 3 seconds. The
PedalBox confirms the successful operation with a new flashing and a green program
button. All programs are now perfectly matched to your accelerator pedal.
23