Whadda SERVO-MG995 Manual

Whadda SERVO-MG995 Manual

Advertisement

MANUAL
SERVO – MG995
EN
WPM603
whadda.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SERVO-MG995 and is the answer not in the manual?

Questions and answers

Summary of Contents for Whadda SERVO-MG995

  • Page 1 MANUAL SERVO – MG995 WPM603 whadda.com...
  • Page 2 If in doubt, contact your local waste disposal authorities. Thank you for choosing Whadda! Please read the manual thoroughly before bringing this device into service. If the device was damaged in transit, do not install or use it and contact your dealer.
  • Page 3 Product overview The Whadda MG995 servo motor is a high-speed, metal gear servo motor . It can be used with most standard RC receivers, or with your own hardware that can output the required PWM signals such as an Arduino® compatible board. The servo comes with all of the required mounting hardware and a selection of arms suitable for a variety of applications.
  • Page 4 Example program 1. Open the built-in example Sweep in the Arduino IDE by going to File > Examples > Servo > Sweep 2. Connect your Arduino compatible board, make sure the correct Board and connection port are set in the tools menu, and hit Upload...
  • Page 5 Modifications and typographical errors reserved - © Velleman Group nv. WPM603 Velleman Group NV, Legen Heirweg 33 - 9890 Gavere...

This manual is also suitable for:

Wpm603

Table of Contents