Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Heatstore HSDI330
Summary of Contents for Heatstore HSDI330
- Page 1 OPERATING INSTRUCTION MANUAL Dynamic Intelirad Aluminium Radiator Models: HSDI330 / HSDI500 / HSDI750 / HSDI1000 HSDI1500 / HSDI2000 These instructions should be read carefully and retained for future use. Note also the information presented on the appliance. 08/53191/0 ISSUE 5...
- Page 2 IMPORTANT These instructions should be read carefully and retained for future use. Note also the information presented on the appliance. IMPORTANT SAFETY ADVICE When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electrical shock, and injury to persons, including the following: IMPORTANT –...
- Page 3 WARNING - THIS APPLIANCE MUST BE EARTHED The electrical installation must be carried out by a competent electrician, and be in strict accordance with the current I.E.E. Regulations for Electrical Equipment in Buildings. The wires in this mains lead are coloured in accordance with the following code: GREEN AND YELLOW: EARTH BLUE:...
-
Page 4: Table Of Contents
Contents General Wall Mounting Quick Start Guide Operation Control Functions Main Screen Setting the Date and Time Modes of Operation Choosing and Setting a Mode Advance Boost Options Child Lock User Information Energy Saving Tips Important... - Page 5 User introduction Thank you for choosing the Heatstore Dynamic Intelirad Aluminium Radiator. We manufacture the highest quality heating products for use in a wide variety of environments. This product has been designed to incorporate the latest, most advanced technologies to give you maximum control over your heating.
-
Page 6: General
5. The product can now be hung on the top wall mounting bracket then fixed in place by securing the bottom wall bracket(s) in place. Dimensions Model(s) Watt (kW) A (mm) HSDI330 0.33 kW HSDI500 0.50 kW HSDI750 0.75 kW HSDI1000 1.0 kW... - Page 7 Fig. 1 Fig. 2 Shelf 150 mm (Min) A mm 300 mm 115 mm 570 mm 150 mm (Min) Fig. 3 Template...
-
Page 8: Quick Start Guide
Timer Mode Description Timer Modes 6 hours heating per day in two Your Heatstore Intelirad Out All Day periods Aluminium Radiator comes 13 hours heating per day in one pre-programmed with four timer... - Page 9 Which Timer Mode is Best for Me? The heater leaves the factory set in Out All Day mode. If you are out during the day and only require heat in the mornings and evenings then this mode will suit your lifestyle and you won’t need to alter anything.
-
Page 10: Operation
Operation The controls are located on the top right of the heater. The heater is fitted with an adjustable electronic controller consisting of a display screen and six touch buttons. Display Screen ‘Menu’ Button ‘Back’ Button ‘Up and Down’ Arrows ‘Enter’... -
Page 11: Control Functions
Control Functions The heater controls can be easily adjusted by using the six buttons on the User Interface. The Display Screen shows the options available at each stage of adjustment. Menu - displays the main options list; - Date/Time - Set the date and time. - Mode - Set the mode of operation. -
Page 12: Main Screen
Main Screen After 30 seconds the heater will default back to the Main Screen. Here the chosen temperature is displayed along with the mode of operation. Any use of the Advance function will be displayed here, and pressing Enter will show the functions which are enabled. When left inactive for a long period of time this display will ‘sleep’... -
Page 13: Modes Of Operation
Modes of Operation The heater comes pre-programmed with a set of heating profiles. There are four options available - three pre-programmed and one user adjustable timer; Out All Day (pre-programmed) - has the following preset times Monday to Sunday, which can be altered if desired 07.00 until 08.30 17.30 until 22.00 Home All Day (pre-programmed) - has the following preset times Monday to Sunday, which can be altered if desired;... -
Page 14: Choosing And Setting A Mode
Choosing and Setting a Mode Timer Modes To choose a timer mode press Menu and then to select Mode. Then press Enter. Then select Timer Mode, again using the Enter button. followed by Enter. Select the mode required, by pressing the For options Out All Day, Home All Day and User Timer, three choices are available - Select, Preview and Modify. - Page 15 If anticipatory control is disabled, the heater will not operate until the beginning of the heating period. This should be taken into consideration when setting the heating periods. In Holiday mode the number of days that the room will be unoccupied can be adjusted together with the required room temperature.
-
Page 16: Advance
Advance The Advance function allows the heating profile of the heater to be changed temporarily. When a timer has been selected, the Advance Advance function is used to begin the next Comfort On mode early. If the heater is in Comfort Off mode and heat is required, press the Advance button. -
Page 17: Child Lock
Child Lock To lock the controls press Back and Enter for three seconds. Child Lock will appear at the bottom of the screen. To unlock the control repeat the action of pressing Back and Enter for three seconds. Child Lock NOTE: The controls cannot be adjusted when child lock is active. -
Page 18: Energy Saving Tips
Energy Saving Tips The energy we use to heat, light and power our homes contributes over a quarter of the UK’s carbon emissions, the principle contributor to climate change. Around half the energy used in the home is for heating and hot water, so using your heating system efficiently will not only help the environment, but also save you money. -
Page 19: Important
10 years Aluminium Body Warranty After sales service If the Heatstore Intelirad appears damaged when first received or does not function correctly contact us by phone 0117 923 5375 or email enquiries@heatstore.co.uk Do not return the product in the first instance as this may delay us providing you with a satisfactory service. - Page 20 Contact details Heatstore, Unit 12, Access 18, Bristol, BS11 8HT, United Kindom This product complies with the European Safety Standards EN60335-2-30 and the European Standard Electromagnetic Compatibility (EMC) EN55014, EN60555-2 and EN60555-3. These cover the essential requirements of EEC Directives 2006/95/EC and 2004/108/EC...
Need help?
Do you have a question about the HSDI330 and is the answer not in the manual?
Questions and answers
Hi the timer is set to come on at 4pm but it seems to come on earlier and I dont know why