Advertisement
5. OPERATION
5.1.
Take the container of wax rust inhibitor and read and act on the instructions.
5.2.
PREPARING GUN FOR USE
5.2.1.
Unscrew the gun from the canister. Pour the wax into the canister (fig. 3.C) and then
securely replace the gun.
5.2.2.
Attach the gun to the compressed air system, see Section 4. DO NOT exceed specified
delivery pressure, see Specification section 4.
5.2.3.
Aim the nozzle of the gun into a safe area and depress the trigger (fig. 3.B) to check the
wax flow. Adjust the trigger stop (fig. 3.A) to give the required spread.
5.3.
EXTENSION PROBES
5.3.1.
The SG18 is supplied with two extension probes (fig. 1.1) which may be used to spray
into cavities, between panels, inside doors etc.
5.3.2.
To fit a probe, screw the quick connect union provided (part no: SG18.V2 - 35) onto the gun nozzle (fig. 3.D).
5.3.3.
Chose the appropriate probe and connect it to the quick connect union.
6. MAINTENANCE
WARNING! Ensure you remove the gun from the air supply before attempting any maintenance. It is very important to keep the gun
‰
and components clean to ensure free passage of wax.
6.1.
After use, clean all items, especially probes, with solvent and allow to dry before storage.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
01284 703534
sales@sealey.co.uk
Original Language Version
fig.3
D
B A
C
www.sealey.co.uk
SG18.V3 Issue 1 13/01/20
Advertisement
