Advertisement
How To: Connect to Wi-Fi
The following identifies how to connect to a Wi-Fi signal. Only follow these steps if
using an HLWLAN (Wi-Fi) antenna.
Step 1
Step 2
On the right of the dashboard locate and tap
Press the "wifi bridge" option on the right side
the "config" icon.
of the screen.
Step 3
Step 4
Select the desired network name or SSID to
Enter the network password, followed by the
attempt connection.
check mark to complete.
NOTE: The network password IS CASE SENSITIVE. To confirm connection, go to
16
Config>Network and verify IP addresses appear under the dynamic tab.
Advertisement
Need help?
Do you have a question about the OmniLogic HTG-OL150c and is the answer not in the manual?
Questions and answers