Yealink RoomCast Quick Start Manual page 5

4
Connection
Note: The USB port is used to connect the WPP20 to pair with the RoomCast manually if you purchase the WPP20
separately or the RoomCast Access Point is modified.
5
Setting up RoomCast
After powering on the RoomCast, you can perform basic settings, network
configuration and system settings through the web user interface:
• If you connect to a wired network：
① Connect the PC to the same LAN.
② Open a web browser and enter the device IP address (displayed in the
bottom-right corner of the display) in the address bar.
The default administrator username is "admin" and password is "0000".
• If you do not connect to the network：
① Connect the PC to the wireless AP provided by RoomCast.
(The AP name and password are displayed on the display, and the default name
is Yealink-XXXXXX)
② Open a web browser and enter the device IP address (192.168.144.1) in the
address bar.
The default administrator username is "admin" and password is "0000".
Note: If you do not connect to a wired network, you can connect to the wireless network after accessing the web
user interface through the above methods.
TV
E
N
G
L
I
S
H
3