Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Polaris S100
Summary of Contents for Polaris S100
- Page 1 S100 Radio Quick Guide...
- Page 2 S100 Radio Interface Overview 1. Connect to S100 RTK Receiver 2. Connect to Power Bank (5V Power Input) 3. Radio Mode Select 4. Radio Configuration Port 5. SMA Connector for Radio Antenna 6. SD Card (Base Image or Rover Image)
- Page 3 S100 Radio Hook Up 1. SD Card Should Already Be In the SD Card Slot 2. Jumper to Transceiver Mode (Connect Right 2 Pins) 3. Connect to S100 RTK Receiver 4. Connect to Power Bank 5. Connect to Radio Antenna...
- Page 4 If Base position is set by Polaris Connect App will exist after setting Automatic Survey, one can check coordinates on the up the Base Radio. S100 Rover on the Rover page Polaris Connect App stays after setting up the Rover Radio. One can keep Polaris...
- Page 5 Radio Configuration ( Advanced, No Need & Not to Do This on First Time Use !!! ) The shipped base radio and rover radio pair is plug-and-play, no need for any radio configuration. This Advanced radio configuration information is provided only for situation such as if another user has a pair of radio operating nearby causing interference, and needing to change to...
- Page 6 Radio Configuration (Advanced, No Need & Not to Do This on First Time Use !!! ) Download Link: https://www.ebyte.com/en/pdf-down.aspx?id=201 Connect Radio to Windows PC then Open the Configuration Tool:...
- Page 7 One Base to broadcast RTCM data, sending RTCM data to More Rover. 1. Setup all S100 Radio with same net ID (see page-5 & 6) 2. Setup Base (see page-3 & 4) 3. Setup Rover (see page-3 & 4) Base Radio...
- Page 8 Logging Base RTCM Data To Download file, see page-9.
- Page 9 Download RTCM Data When Wi-Fi connection made, Polaris Connect When download completed, App will download the log file will be saved to log file from S100 /storage/emulated/0/PolarisGNSS automatically. on the phone.
- Page 10 Usage Notice • When detaching USB cable from the radio, please pull the USB cable connector horizontally, avoid bending/tilting upward at the same time.