Summary of Contents for TaoTronics TT-IC001
- Page 1 TAOTRONICS ICE MAKER TT-IC001 Questions or Concerns? User Manual support@taotronics.com...
-
Page 2: Table Of Contents
CONTENTS 1 2 3 4 5 6 01-03 04-07 08-09 10-11 12-13 14-15 IMPORTANT BEFORE USING AUTOMATIC CLEANING TROUBLE- SAFETY USING YOUR WATER SHOOTING INSTRUCTIONS ICE MAKER ICE MAKER ADDING MAINTENANCE GUIDE... -
Page 3: Important Safety Instructions
THANK YOU DO NOT touch or hold the mains plug with wet hands. F O R B E I N G O U R C U S T O M E R IMPORTANT DO NOT immerse any part in water or any SAFETY other liquid. - Page 4 THE FOLLOWING: tipped over, please set upright for at least 2 hours appliance is the same as your local supply. using, check FAQ and contact TaoTronics Support Team. before plugging • DO NOT operate the appliance if the plug, the it in.
-
Page 5: Before Using Ice Maker
Ice Scoop PREPARING FOR USE Transparent Cover Ice Basket Control Panel & Display Ice Full Sensor MAX Water Level BEFORE Air Outlet Water Reservoir Remove all exterior and interior packaging. Check that all parts are inside. USING ICE Clean the interior, ice basket and ice scoop with Drainpipe lukewarm water and a soft cloth. - Page 6 CONTROL AND FUNCTIONS Ice Full On/Off Lights up Press to when ice start or stop basket is full. making ice. Clean Ice Maker Add Water Press and hold for Lights up when 3 seconds to start reservoir is lack or stop cleaning. of water.
-
Page 7: Using Your Ice Maker
Leave 6 inch space around Check that the drainpipe plugs are Fill with clean drinking water. Do not Plug into a properly installed firmly inserted. exceed the MAX line. grounded wall outlet. USING Iced Drinks First Aid YOUR ICE Smoothies Fresh Food MAKER •... -
Page 8: Automatic Water Adding
Automatic Water Adding Recommended Connection Type 1 Recommended Connection Type 2 You can choose to add water automatically by connecting the included hose to the water supply system as instructed. An adapter may be required as per the type of water supply system in your home. -
Page 9: Cleaning And Maintenance
SYSTEM CLEANING REGULAR CLEANING Plug the ice maker into a properly installed grounded wall outlet before system cleaning. Unplug the ice maker before regular cleaning. CLEANING Unplug and take out the ice basket. MAINTENANCE Clean the interior with diluted detergent, warm water and a soft cloth. -
Page 10: Troubleshooting Guide
“CLEAN” Button to start cleaning, then press “ON/OFF” to “CLEAN” flashes restart after cleaning is done. Both “ON/OFF” and Wait 20 minutes for the ice maker to defrost automatically. If Ice-making assembly is frozen. “CLEAN” flash problem persists, contact TaoTronics Support Team. - Page 11 Rev_1.2_EN Warranty and Service Thanks for choosing TaoTronics Ice Maker. This product is covered with TaoTronics product and labor warranty for 12 months from the date of its original purchase. The warranty will not apply in cases of: - Accident, misuse, or repairs performed by unauthorized personnel.
Need help?
Do you have a question about the TT-IC001 and is the answer not in the manual?
Questions and answers
Says needs water when it is full
The “Add Water” indicator may be on because the water floater is stuck. If there is enough water in the reservoir, check if the water floater is blocked, clean it, and restart the machine.
This answer is automatically generated
how long should it take to finish making ice cubes
The TaoTronics TT-IC001 ice maker produces nugget ice in just 18 minutes.
This answer is automatically generated
Press the on/off button and it hums for a bit then starts flashing the need water light. The tank is to the max full line and the float is not stuck. The water will not get pulled from the bottom void.
The TaoTronics TT-IC001 may be humming and flashing the "Need Water" light even when the tank is full and the float is not stuck due to a blocked pipe in the cooling system. This issue prevents proper water circulation and ice formation. Contact the TaoTronics Support Team for further assistance.
This answer is automatically generated