Faucet Operation - Kohler K-72218 Installation And Care Manual
Electronic kitchen faucet
Hide thumbs
Also See for K-72218:
- Installation and care manual (65 pages) ,
- Installation & user manual (32 pages) ,
- Installation and care manual (108 pages)
Table of Contents
Advertisement
Available languages
Available languages
Sensor
LEDs
Faucet Operation
Rotate the handle outward to the open position to start water
flow. The handle LED will illuminate to indicate that the sensor is
functioning.
Adjust the handle to the desired water temperature.
Wave your hand under the spout to turn the water OFF.
Wave your hand under the spout again to restart water flow.
NOTE: Some objects that are clear and certain colors are not
detectable by the sensor. Always use your hand for sensor testing.
If needed, refer to the "Handle LED Adjustment" section for more
information.
NOTE: For extended periods of nonuse, the handle should be
returned to the closed (upright) position. The handle LED will turn
OFF, indicating that water flow is not available.
LED Indicators
Handle LED: Illuminates when the sensor is active.
Circuit board LED: Indicates there is power to the circuit board.
NOTE: The sensor LEDs are only visible inside the spout when the
spray hose is extended.
Green sensor LED: Indicates there is power to the sensor.
1186051-2-D
Sensor
Handle LED
Open Position
10
Manual Override
Kohler Co.
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the K-72218 and is the answer not in the manual?
Questions and answers
How do you stop a dripping faucet
The provided context does not specifically mention how to stop a dripping Kohler K-72218 faucet. However, general troubleshooting for Kohler faucets suggests checking the supply stops, handle position, and ensuring hoses are not kinked. If the faucet is dripping, it may require replacing a faulty cartridge or seal. Refer to the product manual or contact Kohler support for detailed instructions.
This answer is automatically generated