Installing Drivers And Utilities - Pentagram horNET Wi-Fi PCI 11g Installation And Operation Manual

Installing drivers and utilities

1. Insert the driver and utility CD into the CD-ROM drive.
2. The setup wizard should launch automatically, and the following window should appear. If
the wizard does not start automatically, click Start and then select Run. In the box that
appears, type X:\autorun.exe (where X is the letter assigned to your CD-ROM drive).
3. Select Install WiFi PCI / Install WiFi USB to run the driver installer.
4. Select Install Client Utilities and Driver (recommended) and click Next >.
5. Click Yes in the box that appears.
6. Click Next > to install drivers and utilities to the default directory, or click Browse... to
select a different directory.
7. Select the name for the Start menu group where applications shortcuts will be located.
8. Click Next >.
9. Select Wireless Client Utility (WCU) and Supplicant and click Next >.
10. Click OK in the box that appears.
11. After the setup completes, check Yes, I want to restart my computer now to restart the
computer after installation or No, I will restart my computer later to restart the
computer manually at a later time. Click Finish.
12. When the computer restarts, the adapter is ready for use.
horNET P 6121-L3 / P 6122-11