2.
Follow the procedure below to select the Canon DR-1210C document scanner
as the scanner to be used.
1. On the [Scan] menu, click [Select Scanner].
2. Select [Canon DR-1210C]
click the [OK] button.
Note
If [Canon DR-1210C] is not displayed in the list of scanners, re-install the
ISIS/TWAIN Driver. (See "Step 3. Installing the Software" in the Easy Start
Guide.)
3. Set the "Default Page Size".
Note
This dialog box is displayed only when you select [Canon DR-1210C] for the
first time and you click the [OK] button, or when you click [Setup] on the
[Select Scanner screen].
28
Using the Scanner