Installation And Instruction - Aqua-Marina BLUEDRIVE S POWER FIN User Manual

1. Open the packing box and check whether the components are complete
2. Install power fin (As shown in the picture)
2.1 Insert the bottom of power fin into the fin base;
2.2 Insert the slide in push-in pin into the fin base;
* With a US Fin adaptor, the power fin can be also used on any watercrafts with a US FIN
box.
3. Install the battery case
Firstly check whether the battery case is with electricity (please refer to the manual of
Magnetic Switch for details). If it is without or lack of electricity, please charge the battery
case in following steps. (As shown in following pictures)
a

INSTALLATION AND INSTRUCTION

2.1
d
b
9
Insert push-in pin Insert push-in pin
2.2
Plug in
four core
c